Smart Home Products & Project Support in Canada & US | SmartAccess ·
Choose image masking separately from motion-alert zones
Choose Ring Privacy Zones for hiding an image area separately from Motion Zones for detection triggers, and recheck a privacy zone after camera movement rather than assuming excluded motion means an area cannot appear in Live View or video.
A camera owner removes a neighbour's window from a motion-detection zone and assumes the window can no longer appear in video. Ring describes two different controls: Motion Zones define detection areas, while Privacy Zones block parts of the camera image from display or recording. Decide which job is actually needed before changing a zone.
Identify the exact camera and its current supported settings. Ring lists models that do not support Privacy Zones, so a familiar app label should not be promised for every device. Keep the actual field of view in front of you and name the area that needs masking separately from the place where movement should produce an alert.
For a supported device, Ring's privacy instructions direct the user through Device Settings and Privacy Settings to create or edit the zone. Adjust the box over the intended area and complete the documented confirmation. A motion outline in another settings section is not a substitute for this image-masking step.
For example, a front-door camera sees the entrance and part of an adjoining property. The household may want detection focused on its entrance and a separate image area blocked. Record the two choices separately rather than tell a helper that adjusting motion has completed the privacy arrangement.
Recheck the privacy mask if the camera moves. Ring says a position change moves the zone relative to the scene, potentially leaving the intended area unblocked. It also says motion can still be detected behind a Privacy Zone. An event being triggered therefore does not by itself show that the masked image area has become visible.
Understand the recording boundary. Ring says blocked areas become permanent parts of a recording and cannot later be removed from past footage. Review the intended view beforehand rather than assume an owner can recover the hidden image later. Follow applicable privacy requirements for the actual property; a setting alone does not resolve every permission question.
Use the shop only for an identified remaining device or mounting need, checking exact feature support and current terms. No paid monitoring service is needed to understand these two jobs. The useful preparation is a documented image mask and detection area, with a fresh view check after physical movement, rather than a single zone assumed to control everything the camera sees.
Sources and further reading
- Using privacy features in the Ring app · Read 2026-11-12
- How To Set Up Motion Zones So You Only Get the Alerts That Matter - The Ring Blog · Read 2026-11-12
This is general information. Check the relevant authority or manufacturer for the rules, compatibility and terms that apply to your situation.
More practical guides