Aqara U300/U50 candidate
Quantity, exact model and supported function are selected for your project.
Regional product & source review →Solutions / Security & Access / HT-R4-003
Condo unit entry retrofit
Choose a reversible entry upgrade only after door and property approval.
Canada-led operations. Your project stays with its country team.
01 / YOUR CUSTOMER’S PROBLEM
An existing condo door may not fit a new lock, and building rules may prohibit alterations.
02 / THE PROPOSED SYSTEM
Measure the existing preparation, handing, clearance and fire-door status; seek building approval; test the approved retrofit without altering unapproved hardware.
03 / THE INTENDED OUTCOME
Choose a reversible entry upgrade only after door and property approval.
WHAT GOES INTO THE SETUP?
A device list with a purpose.
These are candidate devices and work items, not a pre-tested fixed kit or a stock promise.
door fit review
Quantity, exact model and supported function are selected for your project.
Regional product & source review →hub if needed
Quantity, exact model and supported function are selected for your project.
Regional product & source review →| Equipment / work item | Quantity logic | Before ordering |
|---|---|---|
| Regional smart locks | One approved retrofit lock per eligible unit door | Confirm door fit, local permissions, supported credentials and mechanical backup. |
| Project scope / optional items | fitting accessories after measurement | Confirm the actual regional model, installation conditions and agreed project scope. |
| Hubs & control domains | hub only if the required functions need it | Verify device support, radio coverage, capacity and account isolation. |
One approved retrofit lock per eligible unit door; fitting accessories after measurement; hub only if the required functions need it.
DESIGN THE WORK. DEFINE THE HANDOVER.Your project needs
Your project needs
more than a device box.
Existing-condition survey, room device-position plan, reversible-work or wiring scope, commissioning checklist and itemized candidate BOM.
- Review the site, existing controls and regional model options.
- Agree the room / opening / zone schedule and accessories.
- Define test behavior, manual fallback and maintenance ownership.
System planning illustration
Planning illustration based on this scenario. The final model selection, function testing and site drawing are agreed for your project.
Technical checks before a quotation
Confirm regional SKU and supplier, wiring/voltage and local requirements, firmware and protocol roles, supported bridge functions, manual operation, privacy and install permissions. The diagram is a planning aid; the final project documents take precedence.
Canada / United States sourcing
Canada is quoted in CAD; United States projects in USD. Supplier, exact SKU, stock, lead time, warranty and installation coverage remain to be confirmed. No regional availability is inferred from an international manufacturer page.
US manufacturer catalog ↗ · Canada catalog reference ↗RELATED PLANNING OPTIONS
Keep the conversation focused.
Licensed setting · illustrativeSecurity & Access · HT-R4-004
Rental guest access rotation
Guest codes can remain usable after checkout.
Region-eligible smart lock; guest access control; audit process
See the setup & scope →
Licensed setting · illustrativeSecurity & Access · HT-R4-005
Garage service door watch
The garage service door is often left open without anyone noticing.
Door & window sensor; supported hub; alert routing
See the setup & scope →
Licensed setting · illustrativeSecurity & Access · HT-R4-006
Secondary side-door coverage
A side entrance receives little attention and no one owns its alerts.
Door contact sensors; camera where lawful; hub
See the setup & scope →
LET’S MAKE IT SPECIFICTell us what
Tell us what
you’re building.
Get a conversation about the right equipment, a defined system scope and the support your team needs.
Canada-led operations. Your project stays with its country team.
Canada-led operations · Canadian inquiries → Canada team · US inquiries → US team.