Aqara water leak sensor
Quantity, exact model and supported function are selected for your project.
Manufacturer model reference ↗Solutions / Kitchen & Water Safety / HT-R4-041
Under-sink leak alerts
Place an alert at the water-risk point and assign a responder.
Canada-led operations. Your project stays with its country team.
01 / YOUR CUSTOMER’S PROBLEM
A small leak under the sink can spread before someone sees it.
02 / THE PROPOSED SYSTEM
Position the sensor at the agreed low point, perform a controlled wet test, and verify alert delivery, cleaning and reset steps.
03 / THE INTENDED OUTCOME
Place an alert at the water-risk point and assign a responder.
WHAT GOES INTO THE SETUP?
A device list with a purpose.
These are candidate devices and work items, not a pre-tested fixed kit or a stock promise.
supported hub
Quantity, exact model and supported function are selected for your project.
Regional product & source review →notifications
Quantity, exact model and supported function are selected for your project.
Regional product & source review →| Equipment / work item | Quantity logic | Before ordering |
|---|---|---|
| Sensing points | One sensor per independently monitored under-sink risk point | Validate the measured function, placement, environmental rating and alert path. |
| Project scope / optional items | supported hub by tested coverage | Confirm the actual regional model, installation conditions and agreed project scope. |
| Scope exclusions | no shutoff valve included unless separately approved | Excluded or separately assessed; do not order it from this concept. |
One sensor per independently monitored under-sink risk point; supported hub by tested coverage; no shutoff valve included unless separately approved.
DESIGN THE WORK. DEFINE THE HANDOVER.Your project needs
Your project needs
more than a device box.
Per-unit location and permission register, named response responsibilities, turnover or maintenance checklist and project-specific candidate BOM.
- Review the site, existing controls and regional model options.
- Agree the room / opening / zone schedule and accessories.
- Define test behavior, manual fallback and maintenance ownership.
System planning illustration
Planning illustration based on this scenario. The final model selection, function testing and site drawing are agreed for your project.
Technical checks before a quotation
Confirm regional SKU and supplier, wiring/voltage and local requirements, firmware and protocol roles, supported bridge functions, manual operation, privacy and install permissions. The diagram is a planning aid; the final project documents take precedence.
Canada / United States sourcing
Canada is quoted in CAD; United States projects in USD. Supplier, exact SKU, stock, lead time, warranty and installation coverage remain to be confirmed. No regional availability is inferred from an international manufacturer page.
US manufacturer catalog ↗ · Canada catalog reference ↗RELATED PLANNING OPTIONS
Keep the conversation focused.
Licensed setting · illustrativeKitchen & Water Safety · HT-R4-042
Laundry room water risk
Washer supply and drain connections can leak unnoticed.
Water leak sensor; hub; response contact
See the setup & scope →
Licensed setting · illustrativeKitchen & Water Safety · HT-R4-043
Bathroom night pathway
Turning on a bright ceiling light at night is uncomfortable.
Motion sensor; low-level lighting; manual switch
See the setup & scope →
Licensed setting · illustrativeKitchen & Water Safety · HT-R4-044
Sink plus valve review
A leak alert is less useful when no one is available to respond.
Leak sensor; Aqara Valve Controller T1 candidate; plumbing assessment
See the setup & scope →
LET’S MAKE IT SPECIFICTell us what
Tell us what
you’re building.
Get a conversation about the right equipment, a defined system scope and the support your team needs.
Canada-led operations. Your project stays with its country team.
Canada-led operations · Canadian inquiries → Canada team · US inquiries → US team.