Entry-to-light welcome scene

Use a tested entry event to light the foyer while leaving the wall switch usable.

Request this project BOM & quote

Canada-led operations. Your project stays with its country team.

Living room photograph — LICENSED SETTING · A relevant space, not proof of installed devices or a completed SmartAccess project.

Entry-to-light welcome scene concept system illustration — SYSTEM PLANNING ILLUSTRATION · Candidate devices and arrows show intent; test the exact functions for your project.

01 / YOUR CUSTOMER’S PROBLEM

Arriving home after dark means searching for a light switch.

02 / THE PROPOSED SYSTEM

Choose either a supported lock event or contact event, apply a time or brightness condition, and test the foyer light and independent manual operation.

03 / THE INTENDED OUTCOME

Use a tested entry event to light the foyer while leaving the wall switch usable.

WHAT GOES INTO THE SETUP?

A device list with a purpose.

These are candidate devices and work items, not a pre-tested fixed kit or a stock promise.

DEVICE TYPE / CANDIDATE

Smart lock/contact

Quantity, exact model and supported function are selected for your project.

Regional product & source review →

DEVICE TYPE / CANDIDATE

supported hub

Quantity, exact model and supported function are selected for your project.

Regional product & source review →

DEVICE TYPE / CANDIDATE

switch and light zone

Quantity, exact model and supported function are selected for your project.

Regional product & source review →

Equipment / work item	Quantity logic	Before ordering
Scene trigger / event source	One entry-event source per selected door	Test the selected event and prevent unintended actions.
Lighting zones & controls	one rated control per foyer circuit or compatible lamp group	An electrician checks circuit, load, driver and multi-way compatibility.
Hubs & control domains	required hub by verified event-to-action path	Verify device support, radio coverage, capacity and account isolation.

One entry-event source per selected door; one rated control per foyer circuit or compatible lamp group; required hub by verified event-to-action path.

DESIGN THE WORK. DEFINE THE HANDOVER.

Your project needs
more than a device box.

Function and interface map, controller dependencies, event/action test plan, manual fallback record and candidate equipment schedule.

Review the site, existing controls and regional model options.
Agree the room / opening / zone schedule and accessories.
Define test behavior, manual fallback and maintenance ownership.

Discuss my specific setup

Point-planning illustration. Generic room layout; not a measured installation drawing. Numbered device locations require a site survey.

System planning illustration

SmartAccess adapted system illustration HT-R4-009

Planning illustration based on this scenario. The final model selection, function testing and site drawing are agreed for your project.

Technical checks before a quotation

Confirm regional SKU and supplier, wiring/voltage and local requirements, firmware and protocol roles, supported bridge functions, manual operation, privacy and install permissions. The diagram is a planning aid; the final project documents take precedence.

Canada / United States sourcing

Canada is quoted in CAD; United States projects in USD. Supplier, exact SKU, stock, lead time, warranty and installation coverage remain to be confirmed. No regional availability is inferred from an international manufacturer page.

US manufacturer catalog ↗ · Canada catalog reference ↗

RELATED PLANNING OPTIONS