Living-room three-scene lighting

Provide distinct lighting moods selected from a physical control.

Request this project BOM & quote

Canada-led operations. Your project stays with its country team.

Daylit living room in Rhinebeck, New York — LICENSED SETTING · A relevant space, not proof of installed devices or a completed SmartAccess project.

Living-room three-scene lighting concept system illustration — SYSTEM PLANNING ILLUSTRATION · Candidate devices and arrows show intent; test the exact functions for your project.

01 / YOUR CUSTOMER’S PROBLEM

Reading, watching a film and hosting guests all use the same living-room lighting.

02 / THE PROPOSED SYSTEM

Separate task and ambient zones, set three agreed brightness scenes, and test the chosen smart-lamp or dimmer branch without putting incompatible lamps behind a dimmer.

03 / THE INTENDED OUTCOME

Provide distinct lighting moods selected from a physical control.

WHAT GOES INTO THE SETUP?

A device list with a purpose.

These are candidate devices and work items, not a pre-tested fixed kit or a stock promise.

DEVICE TYPE / CANDIDATE

Aqara LED Bulb T2

Quantity, exact model and supported function are selected for your project.

Manufacturer model reference ↗

DEVICE TYPE / CANDIDATE

Lutron Caseta dimmer branch

Quantity, exact model and supported function are selected for your project.

Regional product & source review →

DEVICE TYPE / CANDIDATE

wall control

Quantity, exact model and supported function are selected for your project.

Regional product & source review →

Equipment / work item	Quantity logic	Before ordering
Project device schedule	Count independently controlled lamp groups and circuits	Finalize the independent zones and suitable regional models after survey.
Project scope / optional items	one compatible dimmer per dimmed circuit or suitable smart bulbs per lamp	Confirm the actual regional model, installation conditions and agreed project scope.
Physical controls	physical control at agreed operating points	Agree accessible positions, labels and the manual fallback.

Count independently controlled lamp groups and circuits; one compatible dimmer per dimmed circuit or suitable smart bulbs per lamp; physical control at agreed operating points.

DESIGN THE WORK. DEFINE THE HANDOVER.

Your project needs
more than a device box.

Existing-condition survey, room device-position plan, reversible-work or wiring scope, commissioning checklist and itemized candidate BOM.

Review the site, existing controls and regional model options.
Agree the room / opening / zone schedule and accessories.
Define test behavior, manual fallback and maintenance ownership.

Discuss my specific setup

Concept design visualization: Two activities, two lighting zones — CONCEPT VISUALIZATION · Design inspiration with generic devices. Not an exact model image or completed installation.

System planning illustration

SmartAccess adapted system illustration HT-R4-011

Planning illustration based on this scenario. The final model selection, function testing and site drawing are agreed for your project.

Technical checks before a quotation

Confirm regional SKU and supplier, wiring/voltage and local requirements, firmware and protocol roles, supported bridge functions, manual operation, privacy and install permissions. The diagram is a planning aid; the final project documents take precedence.

Canada / United States sourcing

Canada is quoted in CAD; United States projects in USD. Supplier, exact SKU, stock, lead time, warranty and installation coverage remain to be confirmed. No regional availability is inferred from an international manufacturer page.

US manufacturer catalog ↗ · Canada catalog reference ↗

RELATED PLANNING OPTIONS