Lobby and amenity lighting

Schedule eligible common-area lights while keeping required safety lighting independent.

Request this project BOM & quote

Canada-led operations. Your project stays with its country team.

Modern commercial lobby with timber walls and seating — LICENSED SETTING · A relevant space, not proof of installed devices or a completed SmartAccess project.

Lobby and amenity lighting concept system illustration — SYSTEM PLANNING ILLUSTRATION · Candidate devices and arrows show intent; test the exact functions for your project.

01 / YOUR CUSTOMER’S PROBLEM

Lobby and amenity lights remain on outside their intended operating hours.

02 / THE PROPOSED SYSTEM

Separate ordinary and required emergency circuits with the installer, agree occupancy or time rules, and test the physical override.

03 / THE INTENDED OUTCOME

Schedule eligible common-area lights while keeping required safety lighting independent.

WHAT GOES INTO THE SETUP?

A device list with a purpose.

These are candidate devices and work items, not a pre-tested fixed kit or a stock promise.

DEVICE TYPE / CANDIDATE

Rated lighting controls

Quantity, exact model and supported function are selected for your project.

Regional product & source review →

DEVICE TYPE / CANDIDATE

physical override

Quantity, exact model and supported function are selected for your project.

Regional product & source review →

DEVICE TYPE / CANDIDATE

schedule

Quantity, exact model and supported function are selected for your project.

Regional product & source review →

Equipment / work item	Quantity logic	Before ordering
Lighting zones & controls	Rated controls per eligible common-area lighting circuit	An electrician checks circuit, load, driver and multi-way compatibility.
Sensing points	sensors by tested occupancy coverage	Validate the measured function, placement, environmental rating and alert path.
Scope exclusions	emergency and required egress circuits excluded from this automation	Excluded or separately assessed; do not order it from this concept.

Rated controls per eligible common-area lighting circuit; sensors by tested occupancy coverage; emergency and required egress circuits excluded from this automation.

DESIGN THE WORK. DEFINE THE HANDOVER.

Your project needs
more than a device box.

Per-unit location and permission register, named response responsibilities, turnover or maintenance checklist and project-specific candidate BOM.

Review the site, existing controls and regional model options.
Agree the room / opening / zone schedule and accessories.
Define test behavior, manual fallback and maintenance ownership.

Discuss my specific setup

Concept design visualization: Meeting-room light, reviewed before rollout — CONCEPT VISUALIZATION · Design inspiration with generic devices. Not an exact model image or completed installation.

System planning illustration

SmartAccess adapted system illustration HT-R4-075

Planning illustration based on this scenario. The final model selection, function testing and site drawing are agreed for your project.

Technical checks before a quotation

Confirm regional SKU and supplier, wiring/voltage and local requirements, firmware and protocol roles, supported bridge functions, manual operation, privacy and install permissions. The diagram is a planning aid; the final project documents take precedence.

Canada / United States sourcing

Canada is quoted in CAD; United States projects in USD. Supplier, exact SKU, stock, lead time, warranty and installation coverage remain to be confirmed. No regional availability is inferred from an international manufacturer page.

US manufacturer catalog ↗ · Canada catalog reference ↗

RELATED PLANNING OPTIONS